The Seismic Assessment of Existing Buildings (the Guidelines) provides a technical basis for engineers to carry out seismic assessments of existing buildings within New Zealand.
Part C of the Guidelines describes the Detailed Seismic Assessment (DSA) process used to assess the seismic behaviour of a building. This is a more comprehensive assessment than the Initial Seismic Assessment process described in Part B. The DSA assesses the structural load paths within the building, the capacity of each structural element, the likely inelastic mechanisms, the global building response to earthquake shaking and the impact of secondary structural and critical non-structural building elements.
The DSA process is based on the Part A principles, which are an integral part of the seismic assessment process. Sections C1, C2, C3 and C4 provide an overview of the DSA process, the assessment procedures and analysis techniques, the earthquake demands and geotechnical considerations. Sections C5 to C9 provide recommendations for specific materials and Section C10 provides recommendations for secondary structural and non-structural elements. Each of these build on the common aspects within Sections C1 to C4 and Part A.
Summary and Download
Section C2 (download) sets out a detailed seismic assessment procedure. It specifies general analysis requirements including basic assumptions, selection of seismic analysis procedures, requirements awl limitations for the types of analysis procedure, and specific considerations of structural weaknesses. The procedures presented include a first principles, mechanism-based method irrespective of whether or not a force based or displacement based procedure is being used.
This web site has a searchable Knowledge Base with answers to questions about the Guidelines. Use article links in the Knowledge Base section to the right to view these.
If you have a question about Section C2, please check the Knowledge Base articles for Part C. If it is not addressed there, please refer to Writing Questions so your question can be efficiently addressed when you send it using the form below. Use the article links in the Knowledge Base section to the right for questions on Part A or Part B.
|Initial release (Current)||1||4 MB||July 2017|
|Consultation Draft||2016_C||3 MB||10 October 2016|
|Sector Briefing Draft||2016_SB||8 MB||30 June 2016|